SPECTRUM 8 AND 6 PRIVACY 1" MINI BLINDS

Spectrum Privacy Mini Blinds should be your choice when the least amount of light is required in blinds.  The key to Spectrum Blinds is hidden rout holes and 18mm ladder spacing. When adding color coordinated side channels, Spectrum offers more room darkening than any other 1” mini blind can provide.  To keep maintenance at a minimum, Spectrum’s high quality ZMC aluminum slats are protected with the “Dust-less”, dust inhibitor feature. The same reliable component system featured in Malibu is put to use throughout Spectrum’s fabricating; creating a blind that is both functional and appealing.

Features

•Durable, slim profile 1” x 1” steel headrail
•Reliable, superior quality snap-in component system  
•ZMC “Dust-less” aluminum slat in 8 & 6 gauge
•Near room darkening, with hidden rout holes and18mm ladder spacing
•Optional color coordinated side channels
•Functional and appealing
•Lifetime warranty

Product Specifications

1. Signature Series/ Spectrum headrail is a “U” shaped configuration, dimensions are 1”h. x 1”d. with rolled edges at the top. Fabricated steel is 0.024” thick (before paint) and iron phosphate treated. Headrail is acrylic primed with a finish coat of baked polyester enamel.  
a. Headrail incorporates steel end stiffeners with adjustable tabs for reinforcement.
2. Operating hardware is of snap-in design. Tape roll and tape roll supports are made of acetyl, low friction thermoplastic, which are self lubricating and maintenance free for smooth operation and diminished wear on lift cords and braided ladder.
3. Crash-proof cord lock is a snap-in design, thermoplastic bodied unit. The cord smoothly passes over a curved metal insert, and a floating geared roller, which initiates the safety feature and automatically locks the blind whenever the cord is released. Cord lock is equipped with a built in cord separator that prevents multiple cord form twisting as they enter through the cord lock.
4. Precise clutch tilter holds the slats at any angle without movement. Filly enclosed housing and worm and gear system is constructed of clear thermoplastic.
5. Tilt rod is square in shape, with a 0.156-inch diameter at its widest point. Tilt rod is composed of solid steel and implements an instant tilting action.
6. Aluminum Slats are manufactured of ZMC ALCOA Aeroflex 5086 aluminum alloy. Slats are nominally 1” wide and are available in both .006 and .008 gauge thicknesses. Slat routs are punched in rear to minimize light seepage when slats are overlapped.
7. Braided ladder is constructed of polyester yarn with a double crossed inter-braided design for maximum slat support. Ladder spacing between the slats I8mm.
8. Lift cords are constructed of a braided polyester jacket with a rayon center core. Diameter of cord is 1.4mm.
9. Bottomrail is made of roll formed steel, which is an open “C” design for maximum strength. Fabricated steel is 0.24” thick (before paint) and iron treated. Bottomrail is acrylic primed with a finish coat of polyester baked enamel. Thermoplastic end caps and tape retainers are color compatible with bottomrail.
10. Steel installation brackets are designed with a hinged cover. Brackets are inside coated with wash coat polyester enamel. Then finish coated with baked polyester enamel to color coordinate with headrail, slats and bottomrail. Intermediate support brackets are furnished with blinds over 60”.