2" PVC FASHIONS PLUS VINYL BLINDS

Creativity and fashion are the statement with 2” PVC Fashions Plus. No other horizontal blind product can express so many different looks. 2” PVC Fashions Plus can change directions from the clean look of plain curved PVC, to the imagery of a sophisticated drapery fabric. The choice of styles and colors are endless. Durability is a key factor in 2”PVC Fashions Plus’ heavy gauge 2“ vinyl slat, 2” x 2” headrail system and sleek fully enclosed, color coordinated PVC bottomrail.  2” PVC Fashions Plus meets all fire codes, which makes it a great value for most any commercial project.

Features

•Durable 2” x 2” steel headrail
•“State of the art” heavy-duty snap-in component system
•Heavy gauge 2” PVC slat in a wide range of styles and colors
•Available in either wand or cord tilt
•Fully enclosed color coordinated PVC bottomrail
•Durable, creative and fashionable

Product Specifications

1. Signature Series/2” PVC Fashions Plus headrail is “U” shaped configuration: dimensions are 2”h. x 2 1/4”d., with rolled edges at the top. Fabricated steel is 0.024” thick (before paint) and iron phosphate treated. Headrail is acrylic primed with a finish coat of baked polyester enamel. 
a. Headrail incorporates steel end stiffeners with adjustable tabs for reinforcement.
2. Operating hardware is snap-in design. Tape roll and tape roll support are made of acetyl low friction thermoplastic, which are self lubricating and maintenance free for smooth operation and diminished wear on lift cord and ladder.
3. Crash-proof cord lock is a snap-in design thathas a nylon roller, which the cord smoothly passes over. A secured steel roller onto a hinged lock facilitates “Crash-proof” feature. ”crash-proof” safety feature locks the blind automatically whenever the cord is released.
4. 2” PVC Fashions Plus is available with either wand or optional cord tilter. Wand tilter is a precise self-lubricating, thermoplastic worm and gear mechanism, with a fully enclosed plastic housing. Optional cord tilter utilizes a corrosion resistant steel worm and gear system, enclosed in a metal alloy body. The cords operate smoothly by an incorporated pulley and cord guide.
5. Tilt rod is square in shape, composed of solid steel and implements an instant tilting action. Diameter is 1/4”.
6. Vinyl slats are nominally 2” in width. Curved vinyl (PVC, poly-vinyl chloride) smooth edge slats shall be composed of virgin geon pellets, extruded to a .040 gauge (+-.0003).
7. Braided ladder and cloth tapes: braided ladder is constructed of polyester yarn with a double crossed inter-braided design for maximum slat support. Ladder spacing between the slats is 44mm. Cloth tapes are constructed of a high strength rayon cotton blend. Spacing is 1 3/8”; width dimensions are 1 11/16”.
8. Lift cords are constructed of a braided polyester jacket with a rayon center core. Diameter of cord is 1.8mm.
9. Bottomrail is fully enclosed, and which is made of extruded vinyl (poly-vinyl chloride). Bottomrail is 2” in width, tubular shaped and contoured to match the slat curvature. PVC is extruded to.0.080 gauge (+- .0003) and is color coordinate to slat color. 
a. Bottomrail utilizes clear Lexan end caps and shall have centered holes for optional hold pin.  
b. Tape retainer pins are clear thermoplastic.
10. Steel installation brackets are designed with a hinged cover. Brackets are inside coated with a wash coat of polyester enamel. Then finished coated with baked polyester enamel to color coordinate with headrail, slats and bottomrail. Intermediate support brackets are furnished with blinds over 48” wide.